What does a flooring inspector do?

A certified flooring inspector performs an independent on-site evaluation of your flooring system to identify installation defects, product failures, moisture damage, and subfloor issues. The inspection includes technical measurements, moisture testing, photo documentation, and a professional written report summarizing findings and recommendations.

How much does a flooring inspection cost in Southern California?

My Floor Inspection offers three service tiers: Standard Flooring Inspection starting at $550, Advanced Flooring & Tile Inspection starting at $650, and NWFA Forensic Hardwood Inspection starting at $750. Pricing may vary based on travel distance, complexity, and reporting requirements.

Do I need a flooring inspection for an insurance claim?

Yes. A certified independent flooring inspection is often required to support insurance claims involving flooring damage. The inspector provides objective, evidence-based documentation that can be submitted to your insurance company to support your claim. My Floor Inspection provides forensic-grade inspection reports suitable for insurance and legal proceedings.

What certifications does My Floor Inspection hold?

My Floor Inspection holds certifications from the National Wood Flooring Association (NWFA #CP2416122), Flooring Consultants and Inspection Training Services (FCITS #2031), North American Laminate Flooring Association (NALFA), International Floor Covering Inspection Institute (IFCII), and is a CFI University Graduate conducting ASTM-standards-based testing.

What areas does My Floor Inspection serve?

My Floor Inspection serves all of Southern California, including Los Angeles County, Orange County, Ventura County, Riverside County, San Bernardino County, San Diego County, and Santa Barbara County. Primary service cities include Los Angeles, Beverly Hills, Santa Monica, Malibu, Pasadena, Long Beach, Irvine, Newport Beach, and more.

Why is my hardwood floor cupping?

Hardwood floor cupping — where the edges of boards rise higher than the center — is almost always caused by a moisture imbalance. The bottom of the boards is absorbing more moisture than the top, causing them to cup upward. Common causes include subfloor moisture, plumbing leaks, high humidity, or improper acclimation during installation. A certified inspection can identify the source and document the damage.

Why is my SPC or LVP floor separating or buckling?

SPC (Stone Plastic Composite) and LVP (Luxury Vinyl Plank) floors can separate or buckle due to thermal expansion from temperature fluctuations, insufficient expansion gaps at walls, improper installation on uneven subfloors, or excessive direct sunlight. A flooring inspection will assess the installation quality, substrate conditions, and product behavior to determine the root cause.

What causes hollow tile sounds?

Hollow tile sounds (called 'drummy tile') indicate a loss of bond between the tile and the adhesive or substrate beneath. This is typically caused by improper thinset coverage during installation, substrate movement, subfloor deflection, or moisture intrusion beneath the tile. Hollow or drummy tile is a significant installation defect and should be evaluated by a certified tile inspector.

Knowledge CenterSPC / LVP / Vinyl

Vinyl Plank Flooring Failures

Last Updated: July 2026By Efi Eylor · NWFA Certified Inspector

Vinyl plank flooring — including LVP, SPC, and WPC — is one of the most installed flooring types in America. While generally durable, vinyl plank can experience a range of failures including buckling, seam separation, curling, staining, and delamination. Each failure mode has specific causes, and a certified inspector is trained to distinguish between product defects, installation errors, and environmental factors.

Key Takeaways

Buckling is most often caused by thermal expansion without adequate gaps, or subfloor irregularities
Seam separation can result from locking system damage, manufacturing defects, or subfloor movement
Curling at plank edges often indicates adhesive failure in glue-down applications
Staining and discoloration can result from chemical reactions, rubber transfer, or subfloor moisture
A certified inspection evaluates all potential causes: subfloor, installation, product, and environment

Frequently Asked Questions

Is SPC flooring really waterproof?

SPC is waterproof at the surface, but moisture beneath the floor can still cause subfloor damage, adhesive failure, and mold. Waterproof does not mean damage-proof.

How much does a vinyl floor inspection cost?

Our Standard Flooring Inspection starts at $550 and covers vinyl, LVP, SPC, laminate, and carpet. Includes visual assessment, moisture testing, and a written report.

Will my warranty cover this?

Manufacturer warranties typically cover product defects but not installation errors. A certified inspection determines whether the failure is a product or installation issue.

About the Author

Efi Eylor

Independent flooring inspector serving Southern California. Certified as NWFA Certified Inspector (#CP2416122), FCITS Master Inspector (#2031), NALFA Inspector, IFCII Inspector, and CFI University graduate. Specializes in forensic flooring investigations, moisture diagnostics, insurance claims, and expert witness services.

Professional Inspection

Need a Certified Inspection?

My Floor Inspection provides independent, forensic-grade flooring evaluations throughout Southern California. NWFA, FCITS, NALFA, and IFCII certified.

Request Inspection 213-679-9672

Related Services

› Moisture Testing › Expert Witness

› Why Does My SPC Floor Separate?› SPC Locking System Failures › LVP Installation Problems › WPC Flooring Issues

Video Resources

› Forensic Flooring Video Library › Real Case Studies

Certifications

NWFA #CP2416122

FCITS #2031

NALFA Certified

IFCII Certified

ASTM Standards

Back to Knowledge Center